650 nm Laser weight loss Beauty Equipment
The Laser-lipolysis emits low levels of laser energy, which creates
a chemical signal in the fat cells, breaking down the stored
triglycerides into free fatty acids and glycerol and releasing them
though channels in the cell membranes. The fatty acids and glycerol
are then transported around the body to the tissues that will use
them during metabolism to create energy. This process of fatty acid
release is a natural response of the body when the body needs to
used stored energy reserves, thus Laser lipolysis is not creating
any unnatural reaction in the body nor does it affect or damage any
surrounding structures such as skin, blood vessels and peripheral
nerves. A period of exercise post treatment will ensure the
complete metabolism and thus elimination from the body of the freed
* Intensive physical lipolysis to remove fat
* Excess fat cell melted
* Body slimming, cellulite reduction
* Smooth Fatigue
* Remove obstruction from channels and collaterals
* Promote the body's metabolism
Laser for fat reduction,use the 650nm soft laser to destroy the
deep fat cells,broke the cell membrane,change the fat to
triglyceride,then leave out the body to metabolism.
The laser heat can Stimulate the subcutaneous dermal tissue
collagen and elastic fibers hyperplasia,make the treated area skin
tighten and elasticity .
1.Operation step of Laser 2X
(1)Clean the skin, and according the treatment part to choose the
suit band ties and tied them up.
(2)Put the Laser 2X work heads into the band ties, the side with
Led contact to skin directly.
(3)Set intensity of every Laser 2X in interface (Fig 3) shows. the
range is 1(weak)~3(strong).
When the cursor "V" on the location "channel 1 1Hz", click"←" and
"→"to set the intensity of laser, the
range is 1HZ~1000HZ. OFF means that close channel 1.
Then move the cursor “V” to the “channel 2 1HZ”, click"←" and "→"to
set the intensity of laser, the range is 1HZ~1000HZ. OFF means that
close channel 2.etc.
(4)Setting work time
Click “Time” to enter interface (Fig 4). click"←" and "→"one time
to change one minute, click the number of time directly to change
ten minutes every time.30 minutes of every treatment part.
(5)click "="to start work.
(6)The machine will pause automatically if the setting time is
over. Beautician take the Laser 2X work head
out and put them well, then loosen the band ties.
2.Operation step of Laser 4X
(1)Click the “Laser 4X” in interface (Fig 3) shows to enter
interface (Fig 5).
(2)The other steps please refer to “Laser 2X Function”.
Interface of Machine: